Orbi Satellite Flashing White

Technical glitches can be frustrating especially those of networking devices. At the same time there is no device that doesn’t give its users some or the other errors. Same is with the Orbi and its satellites. Many users report the issue of Orbi satellite flashing white light. Sometimes the flashing white light stabilizes after a few minutes or within seconds. But sometimes it keeps blinking for a longer time period. Thus not allowing the users to get seamless extended coverage. This is where the below-mentioned troubleshooting points can lend you a helping hand. So without further ado let’s begin.

Before checking out the troubleshooting points, it’s important to understand the causes behind Orbi satellite flashing white.

Starting off with one of the most common reasons which is pending firmware updates. When the orbi router and the Orbi satellite aren’t running on the latest firmware version then the flashing white light issue will persist. Moreover incorrect syncing of the Orbi router with the Orbi satellite will also lead to flashing white light issues.

The issue of Orbi satellite flashing white is very common thus it is easily resolvable as well. For the same users can try performing the troubleshooting points as written here:

Power Cycle The Devices

Power cycling the devices can sometimes resolve both the minor as well as major technical glitches. Thus for resolving Orbi satellite flashing white issue, users can try power cycling the devices. To power cycle first withdraw the electrical supply from the Orbi router, orbi satellite as well as from the modem. Do not rush, rather hold on for at least one minute. After that, reinsert the power adapters of each device into their respective power ports. Turn them on one by one. As you turn on, wait for each device to sync in together and stabilize. Check whether flashing white light is now stable or not. If it’s not, then do not panic, just check out the next helping point.

Redo The Syncing Process

As mentioned above, the incomplete synchronisation of the Orbi router and the Orbi satellite can lead to Orbi satellite flashing white issue. Therefore perform the correct syncing process. To do so, follow these steps:

• Place the Orbi satellite within the range of the Orbi router. Avoid unnecessary physical barriers like thick walls in between both the devices. Also avoid placement of other electronic and metal objects as these can interfere with the syncing process.
• Next, ensure both the Orbi router and the Orbi satellite are active. It means they should be connected to the actively working power socket and should be turned on.
• Moving further, turn the Orbi router to access the back panel. There you’ll find a sync button. Push it. Now within the window of two minutes push the sync knob of the Orbi satellite. Now all you need to do is give the devices the time to sync in properly. A stabilized and bright light will indicate the successful connection.

Update Orbi Satellite’s Firmware

The major cause of Orbi satellite flashing white is outdated firmware. Therefore it’s necessary to keep the firmware up-to-date. It not only provides seamless connectivity but also secures the entire network from cyber threats. Here’s how users can manually update the firmware:

Before proceeding, visit the official Netgear website. From there download the latest firmware file for your Orbi satellite.

Moving forward, open any internet browser. Head to the address bar. Type orbilogin.net. Press Enter. Didn’t work? Use orbilogin.com or 192.168.1.1. Now move to the advanced option. From the drop down list select Administration. Here you’ll find the option of Firmware Upgrade. Therefore select manual update. Lastly, follow all the on-screen prompts and update the firmware to resolve the Orbi satellite flashing white light issue successfully.

During the upgrade, the satellite may reboot itself, so do not panic. Neither perform any other activity during the upgrade. As this may cause irreparable damage to the satellite.

Reset If The Problem Still Persists

In case none of the above troubleshooting points serve the purpose then the only option before connecting to the experts is performing the factory reset.

Before that let’s make it clear, that factory reset flushes all the personalized settings. Basically the Orbi satellite returns in its original settings. Moreover be mindful that during the reset, the users can’t perform any activity on the satellite and active supply of electricity is utmost important. If during the reset electrical supply cuts, then the satellite may get damaged completely. Therefore, use the electrical outlet that has a connection to the inverter.

Now to reset the Orbi satellite, grab a paperclip. Or use something similar to it. Turn the satellite and on its back panel find the reset hole. Insert the pin into it very carefully. Gently push down and hold on for no less than 6 to 7 seconds. Release as you see the LED light dozing off. Lastly, redo the setup from scratch.

If even after the reset Orbi satellite flashing white light issue doesn’t go away then connect to the experts. As the issue might be complex. Thus expert guidance becomes crucial.