Consideration Points For Orbi Setup
Undoubtedly, some consideration points are taken to be necessary while setting up the router or using the network. Those useful points can help you set up the router easily and enjoy the network seamlessly. Although you can configure the router on your own, it is mandatory to keep some points in mind. Fortunately, in this article, we will tell you about every possible step for your router network.
Check The Router’s Manual Guide
As you unbox the router from its packaged box, you will surely get a quick manual installation guide. That guide will contain brief details of your product as well as the login and other credentials. So, it is advisable to go through that guide once to get to know the login and web, and IP address that you will require during the setup process.
Location While Setting Up The Router
Before starting up the Netgear Orbi Setup process, keep in mind to choose the best location for it. Make sure your router, host modem, and device are placed together for better connectivity. So, plug in the router near the modem and make sure that the socket is providing a proper electricity supply. If it is not, then try using a different power plug and a different location too.
Use Router Details Accurately
Equally important to the best placement, using the router’s details perfectly is also a considerable point. While accessing the router, make sure to insert the web or IP address keeping in mind the spacing and special characters. The interesting thing here is that you can take this information from the manual guide.
Apart from that, after accessing the router’s login window, you must fill in the username and password appropriately. In any case, if you change the network password earlier, then use the latest one during the login process. In case you forgot the changed password then you will need to reset the router to set the password again. So, it is necessary to note down the password somewhere safe.
Change Settings And Monitor Network
After configuring the router, do some changes in the network’s advanced settings to get secure and fastest signals. To do this, visit the router’s web-based setup portal and go to the wireless settings later. From there, swap the bandwidth channels of the router network to make it unique from other networks. Also, verify whether both frequency bands are active or not.
Whereas to monitor the network you can also install the Nighthawk app on your networked device. From there, you can change the SSID network name and password to avoid unwanted user access. Once you installed the app, check the list of devices that are connected to the network. To provide network access to guests and other users, make a separate guest network.
Choose The Router’s Best Location
Once you do the Netgear Orbi setup successfully, locate it at the center of your place. So that, it can amplify signals throughout every nook and corner of the house. However, make sure that the router is getting enough signals from the host modem. Additionally, don’t let the metallic and house appliances get in touch with the router as there will be signal interruptions occurring in the network.
Remove Extra Gadgets
To prevent the router’s over usage, it is crucial to disconnect those devices which are not in use currently. Because they are getting and consuming the same amount of signals as the used ones are. So, keep the devices connected only that you are using right now. You can check the number of networked devices on the Nighthawk app.
Keep The Firmware Updated
To avoid obstructions in the router signal and working, keep the firmware latest always. To do this, go to the router’s web-based setup portal and download the file accordingly. Later, execute the Firmware Update process by selecting the option from the same page. This process will take some time and finally ask you to reboot the router.
Router’s Reset Process
Resetting the router will help you to eliminate the errors but it can actually cause damage to the device. Also, it will erase the router’s already configured settings. So, try choosing this method if there is any serious requirement.
To perform this process, press and hold the reset button from the router’s panel till the LED on this starts showing an ideal color. Soon, the stable and solid light will notify you about the completion of the process. After doing this, execute the router’s configuration process again by using any web browser or a smart app.
Thus, these are useful points that you can try out while accessing and using the router network. If you are seeking more help in case you face errors in the router working, then don’t think more to contact our experts. Reach them directly by calling +1-408-477-8750 or mailing care@orbisetup.com.